Clip-on Cable Holder for Ikea Kallax
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip-on cable holder designed for Ikea Kallax that doesn't require any screws or glue
- Ocena
- 5 / 5
- Polubienia
- 79
- Pobrania
- 191
- Wydruki
- 1
- Wyświetlenia
- 1574
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Organize your cables with this clip on cable holder for the Ikea Kallax system. The holder uses the hex screw at the top of the shelf to stay in place. Two versions are provided that are suited for 2 or up to 3 cables. Both were designed to hold standard USB or audio cables, but bigger HDMI cables won't fit. The version for 3 cables has a slightly bigger hole in the middle, so that also braided cables will fit easily.
The holder can be printed without support in the given orientation. I would suggest using a 0.4mm nozzle with 0.2mm layer height.