Dual 120mm mounted fans to 4 inch female air duct hose adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter converts 2x120mm square fans to a 4 inch female air duct hose. It ducts air from 2 side by side 120mm fans.
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 360
- Wydruki
- 0
- Wyświetlenia
- 2370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This adapter converts 2x120mm square fans to a 4 inch female air duct hose. It is meant for feeding air from 2 side by side 120mm computer fans to an exhaust air duct for from a 3d printing cabinet. The 2 120mm fans should be mounted to a MDF board with 2 circle holes cut out for fan air flow. This adapter should be mounted on top of the 2 120mm fans using the four mounting screw holes on the sides that will pass through the fans' mounting holes. You may need to buy extra long screws for mounting. I am using an IKEA Sektion cabinet with MDF board cut as "shelves" dividers.
I use this with https://www.printables.com/model/488920-59-inch-diameter-ac-window-vent-to-4inch-female-du to exhaust air from my printer cabinet.
The full model is dual120mmto4inch.stl. It has been cut into 3 smaller pieces for printing on an Ultimaker size printer. These 3 smaller pieces can be oriented to print with no support needed.