1 / 11
Organic Voronoi Phone Stands
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These stands are made up of floating islands connected by organic supports.
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 169
- Wydruki
- 0
- Wyświetlenia
- 1412
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (58)Powiązane
How to print
The 3mf files have all the support settings configured for you, so you just need to choose your filament profile.
Prints just fine with a 0.3 mm layer height, but you can use a lower one to get nicer-looking curves. All the stands in the pictures are printed at 0.3 mm.
An interesting problem I discovered when designing this
- Currently (2.6.0 beta 2), organic supports try to avoid crossing through the same object they are supporting, as well as other bodies that are considered parts of this object.
- Organic supports will HAPPILY generate right through another object
- At least one part of the object has to touch the bed, otherwise prusaslicer will drop it down automatically. As of 2.6.0 beta 2, you cannon disable this
- Although organic supports are stable enough during printing, the phone stand would not be able to support a phone with just these supports (unless i make them super thicc)
- To solve this, I added a base that is a separate object, so the supports will fuse to it, giving the stand something to stand on. I've also added a 0.01x0.01 cylinder as part of the main object, which prevents prusaslicer from snapping it to the bed.