Trailer for RC CYBERCAR test part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Test part of Fully 3D printed trailer for RC car CYBERCAR.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 805
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
Test part of Fully 3D printed trailer for RC car CYBERCAR.
A calibration component to test if your printer is well set up and you can print the entire model correctly. Try inserting a 10x15x4mm bearing into the printed part. The bearing must not be loose and must fit at the same time.
This is test part for model from https://www.printfully3d.com/product/trailer
EN STEP-BY-STEP USER GUIDE: https://docs.google.com/presentation/d/1ao42Q9VzQxxYVhu9v_yGnwUWcCa9s15ODXkfGVMuW1o/
NON-PRINTED PARTS LIST: https://docs.google.com/presentation/d/1Y5-9KOcu19099Mpzk1jrMrLgOy2EsQytF2GP5V328Kk/
https://www.facebook.com/groups/600923093810246/
https://www.facebook.com/PrintFully3D/
https://www.instagram.com/printfully3d/
https://www.printfully3d.com/
https://www.facebook.com/FlyTime.cz/
https://www.flytime.cz/
https://www.instagram.com/flytime.cz/
Print instructions
EN STEP-BY-STEP USER GUIDE: https://docs.google.com/presentation/d/1ao42Q9VzQxxYVhu9v_yGnwUWcCa9s15ODXkfGVMuW1o/
NON-PRINTED PARTS LIST: https://docs.google.com/presentation/d/1Y5-9KOcu19099Mpzk1jrMrLgOy2EsQytF2GP5V328Kk/