Trailer for RC CYBERCAR test part
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Test part of Fully 3D printed trailer for RC car CYBERCAR.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 24
- Makes
- 0
- Views
- 805
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
Test part of Fully 3D printed trailer for RC car CYBERCAR.
A calibration component to test if your printer is well set up and you can print the entire model correctly. Try inserting a 10x15x4mm bearing into the printed part. The bearing must not be loose and must fit at the same time.
This is test part for model from https://www.printfully3d.com/product/trailer
EN STEP-BY-STEP USER GUIDE: https://docs.google.com/presentation/d/1ao42Q9VzQxxYVhu9v_yGnwUWcCa9s15ODXkfGVMuW1o/
NON-PRINTED PARTS LIST: https://docs.google.com/presentation/d/1Y5-9KOcu19099Mpzk1jrMrLgOy2EsQytF2GP5V328Kk/
https://www.facebook.com/groups/600923093810246/
https://www.facebook.com/PrintFully3D/
https://www.instagram.com/printfully3d/
https://www.printfully3d.com/
https://www.facebook.com/FlyTime.cz/
https://www.flytime.cz/
https://www.instagram.com/flytime.cz/
Print instructions
EN STEP-BY-STEP USER GUIDE: https://docs.google.com/presentation/d/1ao42Q9VzQxxYVhu9v_yGnwUWcCa9s15ODXkfGVMuW1o/
NON-PRINTED PARTS LIST: https://docs.google.com/presentation/d/1Y5-9KOcu19099Mpzk1jrMrLgOy2EsQytF2GP5V328Kk/