Voron ERCF Top Mount Brackets (Flat and 35 degree inclined)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An extremely simple top mount solution for your Enraged Rabbit Carrot Feeder
- Ocena
- 5 / 5
- Polubienia
- 84
- Pobrania
- 607
- Wydruki
- 4
- Wyświetlenia
- 2874
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted a dead simple top mount for my Sturdy Bunny v2 ERCF without using any 2020 extrusion. Taking inspiration from jeoje's Sturdy Handles I made two platforms that mount to the frame using a single M5 roll-in nut and M5x10 bolt. You'll need 4 3x4x5 M3 heat set inserts and some M3x14 bolts to attach the ERCF.
I've also included a set of mounts that inclines the ERCF back by 35 degrees mimicking the Prusa MMU2. On my personal setup I found that it eased some of the sharp turns in the PTFE tubing.
Print using standard Voron print settings, 40%. I've included the Fusion 360 file so you can customize and make improvements.