Raspberry Pi 3A+ case with mount for 4040 or 2040 extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for Raspberry Pi 3 A+ with fan and ventilation. Different versions without fan and a mount are included.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 125
- Wydruki
- 2
- Wyświetlenia
- 768
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This case is designed to fit your Raspberry Pi 3 Model A+.
Outer dimensions: 68x59x15.4 mm
The case is designed to fit a 30x30x7 mm fan mounted like in the picture. Fans like that can be found fairly cheaply online.
I included a mount for 4040 or 2040 aluminum extrusions, which is supposed to be glued on the back. The small holes are for guidance to get a centered fit. If you need a different mount you can use the included one as a template.
Other options without a fan and ventilation are included.