1 / 12
Pickup Truck - Print in Place PLUS (See Video)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No Supports. Print in Place + 2 Stops! 1st stop add 2 Pre-Printed Wheels, second add 2 more, wheels printed INTO model.
- Ocena
- 4,6 / 5
- Polubienia
- 132
- Pobrania
- 353
- Wydruki
- 8
- Wyświetlenia
- 2110
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 8) (Komentarze: 14)Remiksy (1)Kolekcje (179)Powiązane
What is Print in Place PLUS? It's adding filament change stops to insert parts.
- Filament changes are set to 13.4 & 69.4 (for .30mm layers 69.5)
- Do not change color, instead just add tires and restart with same color.
- Tires will be printed into the truck permanently.
CAUTION - Be sure tires clear Pinda Sensor and Nozzle before continuing!!
it will be close but should not interfere. Follow directions step-by-step:
Step 1: Print 4 Tires. You will need these when printing the main truck.

Step 2: At first stop add 2 Tires. Direction doesn't matter, they are symmetrical. Make sure they sit all the way down and clear the nozzle before continuing.

Step 3: At Second stop add other 2 Tires. Make sure they sit all the way down and clear the nozzle before continuing.

…

Here you can see the 2 stops in PrusaSlicer:
