1 / 12
Pickup Truck - Print in Place PLUS (See Video)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
No Supports. Print in Place + 2 Stops! 1st stop add 2 Pre-Printed Wheels, second add 2 more, wheels printed INTO model.
- Rating
- 4.6 / 5
- Likes
- 132
- Downloads
- 353
- Makes
- 8
- Views
- 2,110
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
What is Print in Place PLUS? It's adding filament change stops to insert parts.
- Filament changes are set to 13.4 & 69.4 (for .30mm layers 69.5)
- Do not change color, instead just add tires and restart with same color.
- Tires will be printed into the truck permanently.
CAUTION - Be sure tires clear Pinda Sensor and Nozzle before continuing!!
it will be close but should not interfere. Follow directions step-by-step:
Step 1: Print 4 Tires. You will need these when printing the main truck.

Step 2: At first stop add 2 Tires. Direction doesn't matter, they are symmetrical. Make sure they sit all the way down and clear the nozzle before continuing.

Step 3: At Second stop add other 2 Tires. Make sure they sit all the way down and clear the nozzle before continuing.

…

Here you can see the 2 stops in PrusaSlicer:
