1 / 6
Print in Place Ford F-150 Raptor 2021 — zdjęcie 1
1 / 6

Print in Place Ford F-150 Raptor 2021

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

PrintInPlace Ford F-150 Raptor 2021 with working suspension and wheels that spin. No supports or assembly needed.

Ocena
4,912 / 5
Polubienia
353
Pobrania
3363
Wydruki
40
Wyświetlenia
9927
Oceny
34

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This model of the Ford F-150 Raptor has working suspension and wheels that spin, doesn't require any support material and comes preassembled right off the buildplate.

The only thing you have to do after printing is to snip off a few tiny pillars that prevent the axle casings from fusing with the wheel axles during printing and you are ready to conquer the badlands!

This model is best printed at 100% scale, however, anything down to 60% scale works just fine. 

Despite the limitations of designing a vehicle with interior and working suspension and wheel mechanisms, I was able to preserve all the differentiating and iconic features of the vehicle. Some long bridges could become a problem if you decide to scale the model up, but otherwise, it's a pretty easy model to print. However, if you have issues printing any of my designs, DM me on Instagram (https://www.instagram.com/vit.budina/) and I will send you my Cura profile.

Enjoy! :D

Caution: Sharp Edges - Not suitable for children under 9 years due to breakable plastic. Adult supervision required.

Tagi