Marble ferris wheel / fidget spinner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fun desk toy that is easy to print and customizable with colorful marbles
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 534
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
A really fun and easy to print desk toy!
Print in PLA or any other stiff material. Print in the orientation of the STL files, no supports needed. Takes less than 2 hours to print for the spinner + stand.
I included a design for the most common marble sizes of 16mm and 14mm. I have used 689 bearings (9x17x5mm), however I created a version for the more common 608 bearing (8x22x7mm) as well! The stand is the same for all versions (bearing size and marble size).
Hardware required:
- 9 M3x8mm bolts (length 5-8mm bolts will work too)
- 608 or 689 bearing
- 5 Marbles 14mm or 16mm
Find the bearingless version here
For marbles 13.5-15.5mm I recommend the 14mm version. For marbles bigger than 15.5mm (but no more than 17) I recommend the 16mm version.
