Marble ferris wheel / fidget spinner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fun desk toy that is easy to print and customizable with colorful marbles
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 64
- Makes
- 0
- Views
- 534
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
A really fun and easy to print desk toy!
Print in PLA or any other stiff material. Print in the orientation of the STL files, no supports needed. Takes less than 2 hours to print for the spinner + stand.
I included a design for the most common marble sizes of 16mm and 14mm. I have used 689 bearings (9x17x5mm), however I created a version for the more common 608 bearing (8x22x7mm) as well! The stand is the same for all versions (bearing size and marble size).
Hardware required:
- 9 M3x8mm bolts (length 5-8mm bolts will work too)
- 608 or 689 bearing
- 5 Marbles 14mm or 16mm
Find the bearingless version here
For marbles 13.5-15.5mm I recommend the 14mm version. For marbles bigger than 15.5mm (but no more than 17) I recommend the 16mm version.
