1 / 29
Temperature & Humidity Monitor with BME280, Wemos D1R2 ESP8266 and LCD1604 — zdjęcie 1
1 / 29

Temperature & Humidity Monitor with BME280, Wemos D1R2 ESP8266 and LCD1604

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Temperature and Humidity Monitor for my Prusa Mini+ enclosure. Built with BME280, Wemos D1R2 ESP8266 and LCD1604.

Ocena
0 / 5
Polubienia
7
Pobrania
49
Wydruki
0
Wyświetlenia
635
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Temperature and Humidity Monitor for my Prusa Mini+ enclosure, although it is standalone device (requires USB input for power) so can be used anywhere you want to monitor temperature, humidity and barometric air pressure. A small, portable weather station. 

Built with BME280, Wemos D1R2 ESP8266 and LCD1604 and programmed with Arduino IDE.

The ESP8266 provides WiFi connectivity, I can remotely monitor details via Blynk app (highly recommended for remote monitoring and control of IOT devises).

The enclosure prints in two parts; the base and lid.

The base is printed with supports for the overhangs.

The lid is printed without supports and is fixed with a simple friction fit by adding some small 0.5mm extrusions to the side of the lid inner-lip.

The case is probably bigger than it needs to be, but it allows me to connect the components using Dupont connectors (no need for soldering) which makes it easy to re-use the parts if needed for other project later (I have a plan to make a more compact sensor, with much smaller Wemos Mini with integrated display which I will integrate into Mini+ customs base).

Design files are publicly available to copy and edit on Onshape - URL https://cad.onshape.com/documents/fd3a8a6d9d0c7df782093056/w/8a065253eddf1ea83df2e062/e/5e613671b108cb897f1fb581?renderMode=0&uiState=64b79ea700582f53d711ef96

Tagi