1 / 3
Toolless Voron Gantry/2020 extrusion maintenance tool
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ready to use to lock extrusion/gantry in place
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 205
- Wydruki
- 2
- Wyświetlenia
- 1564
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 7)Remiksy (1)Kolekcje (111)Powiązane
4 simple sticks, ready to use for maintenance. For my Voron 2.4 i use it when working on belts, deracking the gantry, tensioning the belts etc.
Just click them in place, tighten the bolts and it stays in place. No additional tools required. Sticks are the idea from TulnukaWara on the Voron Discord Channel.
BOM:
Printed parts:
- m3x12_knob_x8 x8
- racking_tool_x4 x4
Hardware:
- M3x12 D912 x8
- M3 Washers x8 (Optional)
- M3 Nuts x8
- M3 T-nuts x8