Simple Fridge Magnet (Parametric F360)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's a minimal fridge magnet knob I designed. Parametric in F360 so you can use whatever round magnets you want.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 16
- Wydruki
- 1
- Wyświetlenia
- 139
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here's a minimal fridge magnet knob I designed. Parametric in F360 so you can use whatever round magnets you want.
The only STL I've uploaded has a 6mm deep hole for a 6.35mm magnet. For those of you who don't have access to F360, feel free to request a magnet diameter and hole depth in the comments and I may upload an STL for you.
A quick note on the parameters: I have both a magnet diameter and a fit tolerance parameter. Put in the actual diameter of your magnet and then play with the fit tolerance as necessary. I recommend starting with 0.3mm but it will depend on the calibration of your printer and how tight of a fit you want.
Enjoy!