Simple Fridge Magnet (Parametric F360)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here's a minimal fridge magnet knob I designed. Parametric in F360 so you can use whatever round magnets you want.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 16
- Makes
- 1
- Views
- 139
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here's a minimal fridge magnet knob I designed. Parametric in F360 so you can use whatever round magnets you want.
The only STL I've uploaded has a 6mm deep hole for a 6.35mm magnet. For those of you who don't have access to F360, feel free to request a magnet diameter and hole depth in the comments and I may upload an STL for you.
A quick note on the parameters: I have both a magnet diameter and a fit tolerance parameter. Put in the actual diameter of your magnet and then play with the fit tolerance as necessary. I recommend starting with 0.3mm but it will depend on the calibration of your printer and how tight of a fit you want.
Enjoy!