Prusa Enclosure Phone Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A phone holder you can instal in your prusa enclosure. It is a remix of the official thermometer bracket part.
- Ocena
- 4,667 / 5
- Polubienia
- 34
- Pobrania
- 184
- Wydruki
- 11
- Wyświetlenia
- 1697
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Hey! This is a phone holder for your enclosure so you could monitor the print via PrusaConnect.
It was designed so it can fit most of the phones. There is a hole for your charger and smaller part that can be installed so enven the biggest phones do not fall off, regardless the camera position. The cable is hiden in the corner behind the LED, and then under the enclosure as there is a hole under this corner.
- Material - PETG, ASA, ABS, PC… Would not recommend PLA as it might bend overtime.
- Supports - no
- Layer height - 0.2
- Infill 20%
- It is mounted the same way as the original thermometer bracket part.
Limitations: My phone does produce that much heat, but some older phones might affect the thermistor. If it happens to you, let me know.