Voron V0 Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Voron V0 wall mount to move the little printer off the desk
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 549
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Sturdy Voron V0 wall mount to move it out of the way and allow multiple in a smaller space. Will require a smaller or side mounted spool holder. Small indents to sit the V0s feet into to prevent it from sliding off.
B.o.M
#8x1- ¼'' screws and wall anchors, linked are the ones Ive been using and its held for a week as of posting the model while the printer is in use.
https://www.amazon.com/dp/B08HDCL841?ref=ppx_yo2ov_dt_b_product_details&th=1
Recommended print settings/ materials
You will want a high wall/top/bottom layer count as well as 20%+ infill
I used a .6 nozzle with .3 layer height, 6 walls/top/bottom in a CF PETG and CF ABS from TH3D Studio
CF-ABS
https://www.th3dstudio.com/product/spaghet-carbon-fiber-fill-abs-1kg-1-75mm/?share=tor
CF-PETG
https://www.th3dstudio.com/product/spaghet-carbon-fiber-fill-petg-1kg-1-75mm/?share=tor