1 / 4
Outdoor cover for Schlage Encode Plus
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for the inside portion of the lock, so it can be mounted on an outdoor gate.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 178
- Wydruki
- 1
- Wyświetlenia
- 2479
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to put a Schlage Encode plus on an outdoor gate, but that leaves the part intended to be inside out exposed to the elements. After many designs, I ended up with two pieces. That allows you to mount the back under the lock, then slide the cover over. The cover has a spot for some M3 nuts, to facilitate some small screws to hold it in place. I printed this in PET-CF, and it seems to be water tight at least. Probably won't protect the lock forever, but hopefully will help it live longer outside.