MKS Gen L bracket for Artillery Sidewinder X1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MCU bracket for a MKS Gen L V1.0 inside a Artillery Sidewinder X1. Uses the default studs in the frame.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 402
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I klipperized my Sidewinder X1 and i wanted the USB connection to be internal. I also use a Mini12864 screen and the included cables where too short to reach the MCU in its original position. With this bracket you can make the USB connection internally inside the frame.
It mounts to the original studs. You can pressfit the bracket on, and then screw it down with M3-8mm caphead screws. The MCU can be screwed down with the original screws. In my case i did not have to do something to the wiring. In any case you should have some slack in the wires.