1 / 8
Custom Stock Fan Ducts Neptune 3 Max
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom Fan Ducts that use the stock 4010 fans on Neptune 3 Max Better cooling then stock ducts
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 709
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (12)Powiązane
No bolts to hold as it's nice and tight, just push in the fans after attaching to extruder.
Furthest edge from nozzle can be pushed in all the way until it stops , then carefully push & level out the other side.

Use these 2 screws (one for each side) You need to find 2 more - Either buy or if you cant get 2 more screws from around the printer cover

2 more screws you can use from around the printer plate
