1 / 1
Annex Carabiner Distribution PCB DIN Rail Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows for mounting of the Carabiner Distribution PCB by Annex Engineering to a DIN rail.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 116
- Wydruki
- 1
- Wyświetlenia
- 628
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (26)Powiązane
Found a need to use Annex Engineering's Carabiner Distribution PCB and was surprised to find out that there weren't any that allowed attachment to DIN rails, so this is my crack at making my own.
- You will need a DIN rail bracket (with holes 52.5mm apart on-center) to go with this. My rail bracket of choice is this heat insert version by @mmuellerphoto.
- You will also need 2 M3 heat set inserts to mount the board.
I've included two orientations—one in “landscape” and one in “portrait”—for you to use depending on how you want to plug the harness in.
Also included is a STEP file that has just the Carabiner mount in case you'd like to remix this onto other things.