Mellow CNC TAP Adapter X-Endstop for Voron 2.4 and Trident
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to use the X-Endstop on the XY-Joint with the Mellow CNC TAP
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 176
- Wydruki
- 3
- Wyświetlenia
- 2666
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Unfortunately, Mellow's CNC TAP doesn't provide for the use of the original X-Endstopswitch on the XY-Joint, nor does it include an adapter, so I designed one.
It is attached where the Endstop holder from Mellow is attached. One of the 2.5mm balls that are included in the screw pack of the CNC-TAP is used for centering. This also prevents the adapter from twisting.
BOM:
1 M3x6 BHCS or SHCS
1 Bearing Ball 2,5mm
both included in the screw set of the CNC-TAP
I printed the Adapter in ASA-CF, regular ASA or ABS should work just as well