Vape Cup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This vape cup I designed for my own needs. It fits in the second (smaller) cupholder of my Audi A3 8P.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 1052
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This vape cup I designed for my own needs. It fits in the second (smaller) cupholder of my Audi A3 8P.
The print you see on the photos was sanded and coated with matt black liquid rubber (https://goo.gl/b9nNRV). We will see how good that rubber performs in my car over time. At least it looks good. ;-)
This is my first selfmade 3D model ... so be gracious if anything is wrong with it. ;-)
I used Tinkercad to design it.
Maybe I design vape cups for additional mods I own and add them some day.
If you have any questions, don't hesitate to bla, bla, bla ... ;-)
cheers
- The first model holds my 22mm SMPL mod (https://goo.gl/Yf7yBu), a 50ml liquid bottle (https://goo.gl/rjph4N), a banknote tube (I had space left ;-)) and 2 coins (1 Euro and 2 Euro coins).
The second one holds 2x22mm tube mods and a 50ml liquid bottle.
Update (2018/08/29)
I added an Asmodus Minikin V2 cup with additional room for a pen, an 1 Euro coin and a Post It pad (38 x 51 mm)
The print on the picture looks terrible. It was only a prototype to check the fitting. It was really a rough fast print. 150mm/sec at 0.3mm layerhight.
Print instructions
Category: Other Summary
This vape cup I designed for my own needs. It fits in the second (smaller) cupholder of my Audi A3 8P.
The print you see on the photos was sanded and coated with matt black liquid rubber (https://goo.gl/b9nNRV). We will see how good that rubber performs in my car over time. At least it looks good. ;-)
This is my first selfmade 3D model ... so be gracious if anything is wrong with it. ;-)
I used Tinkercad to design it.
Maybe I design vape cups for additional mods I own and add them some day.
If you have any questions, don't hesitate to bla, bla, bla ... ;-)
cheers
- The first model holds my 22mm SMPL mod (https://goo.gl/Yf7yBu), a 50ml liquid bottle (https://goo.gl/rjph4N), a banknote tube (I had space left ;-)) and 2 coins (1 Euro and 2 Euro coins).
The second one holds 2x22mm tube mods and a 50ml liquid bottle.
Update (2018/08/29)
I added an Asmodus Minikin V2 cup with additional room for a pen, an 1 Euro coin and a Post It pad (38 x 51 mm)
The print on the picture looks terrible. It was only a prototype to check the fitting. It was really a rough fast print. 150mm/sec at 0.3mm layerhight.
Update (2025/07/23)
New addition for DaniBox Micro 21700
Print Settings
Printer Brand:
TEVO
Printer:
Michelangelo
</div>Rafts:
No
Supports:
No
</div>Resolution:
0.2
Infill:
15%
</div>