Airsoft Helmet FAST Goggle Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily mount your goggle to any FAST mount capable helmet
- Ocena
- 5 / 5
- Polubienia
- 82
- Pobrania
- 335
- Wydruki
- 1
- Wyświetlenia
- 2243
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Remember! Eyes are very important and airsofting is dangerous without protection. I use an M3 screw to reinforce these as much as possible but they are still just plastic. I make no guarantee that these will withstand direct impact.
If you read this, please leave a ❤!
I wanted a quick and easy way to mount my goggles to my helmet and this seemed like a pretty good solution. Use two M3x14 (or longer) screws and nuts to hold the two pieces together. I used some bungee cord from an old mag pouch to make the band for the goggles.
These have a satisfying snap into my helmet. There are 2 versions. One for the top-horizontal rail and another for the bottom-verticle rail. The top rail is universal for either the left or right side. The lower rail is not and must be mirrored.
Print out of a durable material such as PETG
Supports are required to get the strongest orientation