Airsoft Helmet FAST Goggle Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easily mount your goggle to any FAST mount capable helmet
- Rating
- 5 / 5
- Likes
- 82
- Downloads
- 335
- Makes
- 1
- Views
- 2,243
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Remember! Eyes are very important and airsofting is dangerous without protection. I use an M3 screw to reinforce these as much as possible but they are still just plastic. I make no guarantee that these will withstand direct impact.
If you read this, please leave a ❤!
I wanted a quick and easy way to mount my goggles to my helmet and this seemed like a pretty good solution. Use two M3x14 (or longer) screws and nuts to hold the two pieces together. I used some bungee cord from an old mag pouch to make the band for the goggles.
These have a satisfying snap into my helmet. There are 2 versions. One for the top-horizontal rail and another for the bottom-verticle rail. The top rail is universal for either the left or right side. The lower rail is not and must be mirrored.
Print out of a durable material such as PETG
Supports are required to get the strongest orientation