CW2 - Mod (BETA)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clockwork 2 mod for MMU filament changing
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 864
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
CW2-Mod (BETA)
Mod for Clockwork2 with tighter profiles to prevent binding for MMU environments.
This version is single sensor, BTT SB2209 with fan door mod. Based on this (with the added BTT SB2209 lower profile):
https://github.com/EtteGit/EnragedRabbitProject/tree/main/usermods/CW2_with_ECAS_and_optional_sensor
I highly recommend you follow the information in the youtube links when rebuilding your stealthburner. It is essential you do not have your filament squeezed too tight by the Guidler or you'll get additional binding.
https://www.youtube.com/watch?v=L1gxBCiE0pk
https://www.youtube.com/watch?v=ly22qmB3NxE
Link to the door with 3007 fan
https://www.printables.com/model/481811-bigtreetech-sb2209-sb2240-pcb-fan
Link to the door without a fan
https://github.com/bigtreetech/EBB/tree/master/EBB%20SB2240_2209%20CAN/Custom%20Printed%20Parts
I have also included my two-screw version cable bridge that has not been published. It cleans up on the weird messed up one from BTT. Screws are aligned properly and another screw to keep it from twisting.
Get the latch from the source file to use with this.
