Simple watch charging stand for aftermarket Samung watch chargers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Charging stand for the bigger knock-off Samsung watch chargers.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
I discovered most models for charging stands for the Samsung watch use the factory charger.
I bought some cheaper knock-off chargers on Amazon. They were too big to fit every other model I found. The factory Samsung charger is about 34X9 mm. This stand is made for a charger that is around 36X10mm. It's a little deep for this charger, but I used Gorilla double sided mounting tape, and that thickness put it at almost the perfect level. I gave it a cable slot to pass through the USB cable, or you can just have it coming off the top. I'm going to make a vanity plug to cover up the slot when I get a chance.