Simple watch charging stand for aftermarket Samung watch chargers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Charging stand for the bigger knock-off Samsung watch chargers.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 35
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
I discovered most models for charging stands for the Samsung watch use the factory charger.
I bought some cheaper knock-off chargers on Amazon. They were too big to fit every other model I found. The factory Samsung charger is about 34X9 mm. This stand is made for a charger that is around 36X10mm. It's a little deep for this charger, but I used Gorilla double sided mounting tape, and that thickness put it at almost the perfect level. I gave it a cable slot to pass through the USB cable, or you can just have it coming off the top. I'm going to make a vanity plug to cover up the slot when I get a chance.