RJ45 flexible strain relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Strain relief for RJ45 connector
- Ocena
- 0 / 5
- Polubienia
- 56
- Pobrania
- 215
- Wydruki
- 0
- Wyświetlenia
- 967
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I needed some strain relief, but all I could find was not optimal for 3d printing. I modified
Eiki Martinson's design a bit ( cable hole was too small, the ribs needed some fillets to be able to print properly and had to make the lever cover a lot larger cause it was preventing the locking mechanism from working).
I tested it with cat5e and cat6 cables ( both of them around 5,5-6mm in diameter), both the cable and the connectors fits tightly, it wont come off on its own.
Needs to be printed in flexible material. I printed in 95A TPU, probably a bit softer material would be better, but it work perfectly with this aswell.