Blue Yeti Nano dust cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Originally, I just wanted a dust cover for my mic, then I decided that I wanted a bit more... and here it is.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
It's a dust cover I needed so I don't splash food bits or have dust accumulating on my Blue Yeti Nano. Originally it was just a simple cap, then it evolved into this, which seems fitting for a mic. LOL
To print
Tree support inside the cap, so the overhang stays flat enough that it does not bump into the mesh on the mic.
To assemble
The ears are just stuck-on, I used white glue. You may need multiple layers of primer or filler with probably a lot of sanding to get it smooth if you want to paint it. There's no registration pins (which I probably should've added...)
To paint
I used about a dozen layers of primer with a lot of sanding(I wish I had used wood filler or similar) followed by a few layers of acrylic paints, then finished with a clear semi-gloss finish.