Clockwork 2 FIlament Sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clockwork 2 FIlament Sensor
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 221
- Wydruki
- 5
- Wyświetlenia
- 2514
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Current (as of 9/23) version of the Clockwork 2 main body with a filament sensor added. I originally printed this model and discovered that the RC1 main body doesn't work with the current versions motor plate.
I used the Omron D2F-L microswitch specifications when designing it however it should work with generic switches as well. I added extra room for the lever path to accommodate 13.5mm levers common on generic switches. The recess for the ball is 6mm so other sizes may work there as well.
Prints without support using the standard Voron print settings.
BOM:
- Omron D2F-L microswitch or equivalent
- 5.5mm (7/16in.) Bearing Ball
Refer to the Voron and Klipper documentation for endstop wiring and filament switch configuration.