1 / 4
Charger Bumpers for AFU and ChiBatterySystems Onewheel Chargers — zdjęcie 1
1 / 4

Charger Bumpers for AFU and ChiBatterySystems Onewheel Chargers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stop ripping bags and having the sharp edges of these aluminum project boxes dig into your back!

Ocena
0 / 5
Polubienia
5
Pobrania
27
Wydruki
0
Wyświetlenia
259
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Stop ripping open bags or having the sharp edges dig into your back! Chi's compact hypercharger for XR and the popular AFU chargers from aliexpress have some sharp edges that bothered me for a while, so I fixed it with some TPU bumpers!

STEP file included for modification for other size boxes, my boxes are 51.1mm x 90.6mm

Print settings .2mm layer height, 15-30% gyroid infill, 2 walls, print with normal support, with interface layers and a 0.25mm top gap between support and model. Print Chamfer (front) side down! (fillet side up)

Simply unscrew the end while unplugged, slip the bumper on, and put the screws back  in!

Tagi