Charger Bumpers for AFU and ChiBatterySystems Onewheel Chargers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stop ripping bags and having the sharp edges of these aluminum project boxes dig into your back!
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 27
- Makes
- 0
- Views
- 259
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Stop ripping open bags or having the sharp edges dig into your back! Chi's compact hypercharger for XR and the popular AFU chargers from aliexpress have some sharp edges that bothered me for a while, so I fixed it with some TPU bumpers!
STEP file included for modification for other size boxes, my boxes are 51.1mm x 90.6mm
Print settings .2mm layer height, 15-30% gyroid infill, 2 walls, print with normal support, with interface layers and a 0.25mm top gap between support and model. Print Chamfer (front) side down! (fillet side up)
Simply unscrew the end while unplugged, slip the bumper on, and put the screws back in!
