Snoopy the 3D-printable Arduino pet robot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Meet Snoopy, an open-source 3D-printable DIY Arduino-based pet robot!
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 658
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Snoopy was designed in Fusion 360 and printed using a Voron 2.4r2 350mm and a Prusa MK3S. It has an ESP32 micro-controller, Arduino firmware, two motors with a caster, a laser scanner sensor (and in a next revision a Raspberry Pi Pico with servos). It has an old smartphone or 7" tablet as display, microphone, audio and IMU.
Instructions and up-to-date files are available here https://makerspet.com/blog/meet-snoopy-pet-robot-model/ including Fusion 360 source files.
Snoopy runs on https://kaia.ai software platform developed at https://remake.ai.
If you are reasonably pleased with this design, please leave a like to help others discover this contribution!
Happy 3D printing!