Smaller Expandable Desk Organizer - 40mm Remix

I printed one of the smaller pieces from the original organizer set for a friend but it turned out to be bigger then expected. To fit on the desk as planed we needed a smaller version of this nicely designed organizer.

Shrinking in the slicer was no option because at a certain point the connectors get too small, so they no longer work properly. Because of this I remodeled the part and shrank the connectors properly in length.

I did not bother to make divided versions because with a outer size of 40mm the inner space is already quite small.

Parts provided:

• There are organizers with outer heights of 15, 30, 60, 90, 110 and 130 mm provided. If you would like to have another height let me know.
• There are two sets of test parts to tune in the printer and slicer settings.
• For all parts I have provided the step files for easy remixing.

Print instructions:

• Filament of your choice
• 0,2 mm layer height
• NO supports needed
• Depending on your printers cooling performance and the print speed you use, you might want to go slower on he first 5mm to prevent sagging on the overhangs of the connector pieces.

Notes on using:

• When printing the test parts the connectors might be a little rough at first. But after some wearing in they get smoother.
• When printing a piece with all six connectors they are a lot smoother right of the bed.
• Be careful when disassembling, it requires some wiggling to separate the parts.

I would be happy to see some of your makes posted :)

Source files in the Alibre Atom format is available but the website does not allow the upload. If you need it send me a message.