Winder cable tidy (6 sizes)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
What's this? Wind up cables, string or ropes of all lengths and sizes with this simple print. 6 different sizes…
- Ocena
- 4,875 / 5
- Polubienia
- 682
- Pobrania
- 1033
- Wydruki
- 9
- Wyświetlenia
- 3754
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
What's this?
Wind up cables, string or ropes of all lengths and sizes with this simple print.
6 different sizes included from 60mm to 126mm (distance between tips of the prongs).
How to print
I used a 0.3mm layer height, 40% infill and no supports.
Printed vertically as shown in the render, however I'm sure it would also work on its side without supports (this may also be a bit stronger due to the layer orientation).
The photos show the largest 126mm winder.
Two versions of the winders are included: one set of STL files with screw holes (numbered 1 through 6) andAll sizes WITHOUT screw holes.stl which contains the same 6 winders but screw holes removed (so you can add your own, glue them to something etc).
The screw holes have a diameter of 5mm + a 2.5mm chamfer.
Category: Organization