Winder cable tidy (6 sizes)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
What's this? Wind up cables, string or ropes of all lengths and sizes with this simple print. 6 different sizes…
- Rating
- 4.875 / 5
- Likes
- 682
- Downloads
- 1,033
- Makes
- 9
- Views
- 3,754
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
What's this?
Wind up cables, string or ropes of all lengths and sizes with this simple print.
6 different sizes included from 60mm to 126mm (distance between tips of the prongs).
How to print
I used a 0.3mm layer height, 40% infill and no supports.
Printed vertically as shown in the render, however I'm sure it would also work on its side without supports (this may also be a bit stronger due to the layer orientation).
The photos show the largest 126mm winder.
Two versions of the winders are included: one set of STL files with screw holes (numbered 1 through 6) andAll sizes WITHOUT screw holes.stl which contains the same 6 winders but screw holes removed (so you can add your own, glue them to something etc).
The screw holes have a diameter of 5mm + a 2.5mm chamfer.
Category: Organization