Bit Adapter 4 & 6 mm for Parkside PASD 4 B2 Cordless Screwdriver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bit Adapter, as close the the original as possible for my Lidl Parkside Screwdriver
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 430
- Wydruki
- 3
- Wyświetlenia
- 1759
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
These are very truth to the original design adapter für 4mm or 6mm (¼ Inch) standard bits.
Made one 4mm version and two 6mm versions, one with and one without a 6x3 magnet slot.
If u need help getting the magnet in after printing, I also made a helper to print along side this print
Print:
print at 0.2
no support
3 walls (or 2-4)
10% infill (u also can do 100% it is not much of a difference)
6x3 mm magnet
You shouldn't have a printer that is too inaccurate because I didn't leave very large tolerances so that the design works like the original