Headphone holder for brand lovers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is a brand logo wall mount. All brands logos are available which can be seen in the picture. Just under 100g filament
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 569
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
you can find my latest creations here:
makerworld dot com/de/u/430260330
The holder is screwed into the wall with two 4mm x 45-50mm screws.
For a better view, I have kept the holder mainly white and used the logo mark color in the CAD program.
The screw holes are arranged so that you can also use a cordless screwdriver.
You don't need an AMS, a one-time filament change can also be done manually.
The logo belongs on the print bed, use a smooth printing plate!
Layer = 0.2
Wall lines = 4
Upper shell layers = 3
Lower shell layers = 4
Infill = 10 (no flash)
If you use PLA, take support/raft interface PETG, if you use PETG, take PLA as support/raft interface.
Upper interface distance = 0
If you have any questions, post a comment.
If you have a brand that is not included, take a picture of your device (car, PC, TV whatever), mention the brand in the comments and I will add to this collection if the logo is compatible.
Do it and add a photo here.
If you like the holder, give me a heart. Thank you!
Keep it simple!