Geosmart Moon Lander belt tensioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Track drive Belt tensioner for the Geosmart toys to improove the performance significantly.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 362
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought my children a second-hand Geosmart Moon Lander. Unfortunately, the experience with it was quite a disappointment at first because the straps were too loose. Probably because they had worn out a bit over time with the previous owner.
But with the belt tensioner here, the toy gets an upgrade and is fit again for the next uses :)
In addition to the pressure parts, you also need 2 x M4 nuts, 2 x M4 x 20 mm screws and 2 x M4 x 25 mm screws, as well as 2 (skateboard/ 608) ball bearings.
For 1 part (bearing holder) you will need supports.
Have fun with the toy! Ours can now ride over all sorts of edges or other toys and spin in circles. All this was never possible before.