Homewerks 7141-50 Replacement Lens
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
7,92 € – 9,68 € netto (bez VAT)
Dla pliku: Lens Leaf_0.6n_0.25mm_PETG_XL_5h2m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 8,80 € netto (środek widełek).
- Masa podana przez autora
- 202 g
- Czas druku podany przez autora
- 5,04 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
This replaces the original LED diffuser lens on the Homewerks ventilation fan with light (Model: 7141-50)
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 469
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Public Domain
I recently purchased this bathroom vent with ceiling light open-box only to find out later that the diffuser lens was cracked. At this part of the story I think the average Joe would be stuck with a broken light fixture… but not this Joe!
Behold my incredible replacement lens! It includes a floral pattern that instantly makes it 10x better than the original.
Now if you've managed to read this far I'm assuming A: you either have this exact light or B: you just are a strange individual who enjoys reading about broken light fixtures. Either way, lets continue.
WHAT YOU NEED:
• A broken 7141-50 Ventilation Fan with Light (not a broken fan, I can't help you with that, you know what i mean)
• A large printer (Like really big!) 290mm x 290mm
• Phillips screwdriver
• Lighter
Seriously, you have this same broken light and a printer that can actually print this? I'm not mad I'm just surprised… seriously. I guess that means I'll have to actually write instructions for you to follow.
INSTRUCTIONS:
• Disassemble light fixture by removing the 4 Phillips screws
• Next pop the lens out, gently press the the tabs to carefully remove the lens. Handle the cracked lens with care and softly, but still gently, dispose of it.
• Next print the replacement lens. I recommend clear PETG.
Life Hack: this creates a subtle elegant appearance to the lens.
Also a textured bed is nice, I chose a powder coated bed because I did.
• Place the lens in the light fixture, and grab your lighter! Please, be an adult, otherwise find one. Lay the lenses and fixture on a flat surface and heat the printed tabs up slightly until they become slightly flexible, one at a time.
• Using your hands gently press the tabs outward to overlap the fixture, hold them until they freeze in place. you may want to where gloves here, I did not, now my hands hate me.
• Reassemble the light fixture, plug the light into the vent, and reattach to the vent.
Congratulations you are now awesome! Like me.
Oh cool, look at the light, did you get that at the store? NO, you printed it!.. mostly, well like 20% of it.