BTT S2DW Nozzle Accelerometer Mounting Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter that gives a more rigid mount onto a hotend than the stock solution.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 202
- Wydruki
- 4
- Wyświetlenia
- 1361
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an adapter for the BTT's S2DW accelerometer - https://biqu.equipment/products/adxl-345-accelerometer-board-for-36-stepper-motors?variant=40446852759650
It allows you to mount it more rigidly rather than using provided soft washers that clamp onto all electronic components:
Or if you don't use those you will short or destroy components because they are placed too close:
The Melt-in version has longer feet that allow you to melt them for a more permanent attachment. But this version interferes with the provided bolt when screwing in place but works okay with the V6 nozzle as a clamping bolt. My recommendation is to print both versions and see how it works with your setup.
The Removable version is just for placing the adapter temporarily as a spacer.
I printed with a 0.3mm nozzle and it fits great. It is a very small part so the smaller the nozzle the better, but you can always try it with a regular 0.4mm.