QIDI X Smart/Plus/Max 3 Fan duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
QIDI X-Smart/Plus/Max 3 replacement fan duct
- Ocena
- 4,333 / 5
- Polubienia
- 89
- Pobrania
- 614
- Wydruki
- 4
- Wyświetlenia
- 4493
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Duct to replace the stock custom 5015 fan in the QIDI X-Smart/Plus/Max 3. QIDI does not sell this fan separately and in fact even glues it into the shroud. This is a wide mouthed fan and really hard to find.
This allows you to use any 5015 24v fan you want, just make sure polarity is correct compared to the OEM one.
Print this in PETG at a bare minimum. ABS preferred, especially if you have the X-plus or X-max bc of the heated chambers.
Remixed from the model made by HL. See posted image for sliced comparison of the duct internals.
Added a few new versons. all the “V2” versions are untested