Prusa XL series: Ultimate Hotend Holder (update: x16 Version with added Toolholders)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
12x/16x Hotend Holder . For those with a greater selection of Nozzles. Screw into the 3030 Extrusion with 2x m4 .
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 82
- Wydruki
- 1
- Wyświetlenia
- 1236
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I dont like to change only the nozzle on the XL (i love it on the Revo) , so i prefer to change the whole hotend. So ive ordered a bunch of different nozzle sizes with the rest ob the Hotend. I also ordered some colored silikon socks to see the nozzle size at first glance.
And because i needed a storage solution for them, i made the ULTIMATE HOTEND MOUNT .
At one of my first designs, i noticed, that the Heater Cardridge and PTC cables are kinda in the way. So i made them each individual channels, where it is easier to get them out.
You mount it on the top right side, on the Aluminum Extrusion with 2 T-Nut and 2 m4 Screws,
update: x16 Version with additional Toolholders
After many asked me how they could support me, you can now
Tip me on KO-FI by klicking here:
https://ko-fi.com/surfalex2000
Check out my other optimized XL Parts! There is a Series to come!
You can find them in my Collection:
https://www.printables.com/@Surfalex2000/collections/830114