Keypad (Numpad) Low Profile Keycaps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple Low Profile Keycap designed to fit the cheap, generic number pads (numpad) that you can find on Amazon.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 428
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
A simple Low Profile Keycap designed to fit the cheap, generic number pads (numpad) that you can find on Amazon. They don't use any fittings that I could find a model for, but I did find a model that came close, so I remixed it to fit!
I used TinkerCAD to modify the key itself to resemble the original key, and heavily modified the connection shaft to allow a nice fit while retraining a smooth-action feeling.
Happy Printing! Cheers!
----------------------------------------------------------------
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.12mm
Infill:
100%
Notes:
The model can be printed either key-side down, or on it's shaft - if using the latter, ensure that you are using standard supports. I also highly suggest using the finest resolution that your printer supports to ensure a good quality print.
In my case, I print at 0.12mm and print it with the shaft-side on the bed with normal supports.
Category: Computer