1 / 10
Huge Desiccant Box for SAMLA 65l Box for keeping ~18 3D Printing Spools completely dry — zdjęcie 1
1 / 10

Huge Desiccant Box for SAMLA 65l Box for keeping ~18 3D Printing Spools completely dry

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Huge desiccant box for SAMLA 65l box designed so that hardly any space is lost for 3d printing spools

Ocena
0 / 5
Polubienia
19
Pobrania
109
Wydruki
0
Wyświetlenia
959
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

DESCRIPTION:

I designed this desiccant box to store my spools for a long time without always having to refill my silica gel/desiccant. In total, the whole two boxes store about 4kg of desiccant and reliably keep the spools bone dry at 10% humidity. For me, it fits 18 spools easily - this number may depend on the spool size for sure. 

It is designed in such a way that it makes perfect use of the recesses in the SAMLA box and therefore takes up virtually no space that could be used for spools. Inside, the box has a support structure that makes it extra sturdy. To make it easier to fill in the silica gel, the boxes have a recess at the top of the support structure so that the silica gel does not spill out. 

I use the T-shaped plugs in the SAMLA lid that are left overs from the plastic extrusion process to prevent the Silicaboxes from tipping over when the lid is closed. But even so, the box is designed in such a way that it is held in place by the SAMLA handle on the inside.

Update: If you temporarily (or for cooling down) store the dry silica gel in round glas jars (as I do) you might find those funnels helpful, one of which I specifically designed for these hugue dessicant boxes: https://www.printables.com/model/1058780-5-different-threaded-funnels-for-11cm-diameter-sto 

 

PRODUCTS USED:

One desiccant box (which takes up half of one side of the SAMLA box) consists of 3 print files. You can freely choose whether and on which side you want to have a hygrometer. This box uses the same hygrometers that are often used for the Bambu AMS desiccant boxes:

https://www.amazon.de/gp/product/B07JDSHD4Z/

The two halves (upper and lower one) of each side are inserted into each other and hold very well on their own. However, I would glue the two halves together to be on the safe side. As glue, you may use one of the following two UHU glues that work well for me:

https://www.amazon.de/UHU-46650-Spezialkleber-harte-Kunststoffe/dp/B000QB6HZK

https://www.amazon.de/UHU-48410-Allplast-30gr/dp/B000KTBLOA 

To close the SAMLA box lid properly, I can fully recommend this clip (36mm version):

https://www.thingiverse.com/thing:2110134 

In order to absolutely let no air exchange happen, I sealed the lid of the SAMLA box with Tesamoll

https://www.tesa.com/de-de/buero-und-zuhause/tesamoll-universal-schaumstoff.html 

and used these clips to tighten the lid:

https://www.thingiverse.com/thing:2110134

Here also the link for the SAMLA box:

https://www.ikea.com/de/de/p/samla-box-transparent-00102975/ 

 

PRINT INSTURCTIONS:

With the Bamblulab X1 Carbon, the models all print without support structures, althought some artifacts on the inside of the box will remain. On the outside they are not visible and doesn't affect the structural integrity of the box. However, if you want this box to be printed perfectly, you may use support structures.

Tagi