Debris bucket for Prusa XL nozzle brush. | Auffangbehälter für Prusa XL Düsenbürste.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Debris container for my Prusa XL nozzle brush. | Auffangbehälter für meine Prusa XL Düsenbürste.
- Ocena
- 4,778 / 5
- Polubienia
- 119
- Pobrania
- 609
- Wydruki
- 20
- Wyświetlenia
- 4012
- Oceny
- 18
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update Nov. 3rd 2024:
- There is a new improved debris bucket remix (Prusa XL Bucket for 16.5mm wide nozzle brush.stl with 16.9mm cutout)
Update Dec. 12th 2023:
- When using the nozzle adapter and if the snap-in lugs do not fit properly (then print with support), the Nextruder can get stuck with the nozzle. I have therefore made a V2-version with a nozzle cut-out.
--------------------------------------
This is a debris container for my Prusa XL nozzle brush. It is simply inserted into the extrusions and can be easily removed for emptying.
In the download area you will find a STEP file for modifications.
The bucket is printed in STL orientation with 0.2-0.3 layer height and 25% infill with support.
— I would be very happy if you have as much fun with the things as I do. —
If you like
:-) Thank you very much!
--- German description ---
Update 03.11.2024:
- Außerdem gibt es einen neuen verbesserten Auffangbehälter-Remix (Prusa XL Bucket for 16,5mm wide nozzle brush.stl mit 16,9mm Ausschnitt).
Update 02.12.2023:
- Bei Verwendung des Nozzle Adapters und wenn die Einrastnasen nicht sauber aufliegen (dann mit Support drucken) kann der Nextruder mit der Düse hängen bleiben. Daher habe ich noch eine V2-Variante mit Düsenausschnitt gemacht.
--------------------------------------
Das ist ein Auffangbehälter für meine Prusa XL Düsenbürste. Sie wird einfach in die Strangprofile eingesetzt und kann zum Leeren entfernt werden.
Im Downloadbereich findet ihr eine STEP-Datei für Änderungen.
Druckt den Behälter in STL Ausrichtung mit 0.2-0.3 Layerhöhe und 25% Infill mit Support.