OV3660 Camera module panel mount w/Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount to attach a rectagular OV3660 110° camera module to a panel with four magnets.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 321
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
This mount is been used for mounting a OV3660 110° Rectangular camera module (https://www.amazon.it/gp/product/B088P1PKFM) to a panel of my homemade enclosure using four magnets (Two inside and two outside) to have it easy to remove.
File “SupportRail” has a little adjustment for the camera. Also a magnet holder is there keep the magnets inside the chamber toghether and avoid them going places (Trust me, they do).
It also have a couple of point to where attach zip ties for cable relief.
Use a M3x20 with a M3 nut for holding the camera mount to the magnetic rail. A couple of M3x6 to screw into the plastic. Uses round 10mm x 2mm magnets.