Handheld Light Rail Mount (1913, Picatinny)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Want to mount a Handheld EDC flashlight onto your Picatinny rails?
- Ocena
- 0 / 5
- Polubienia
- 51
- Pobrania
- 259
- Wydruki
- 0
- Wyświetlenia
- 1028
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Cheap means to mount an expensive light on your airsoft toy.
Suggested to use minimum PLA +/pro, heat warp due to extended use of flashlight is plausible.
Parts List: amazon links
3x M4 washers
I wanted to be able to mount my handheld Cloud Defensive MCH EDC light to my Picatinny rail. The mount is symmetrical and can be mounted on the left side, right side, up, or down. I printed mine in Polymaker PLA Pro, but it can be printed in tougher or more heat-resistant materials. The mount only requires 3x M4 nuts and bolts and prints in just two pieces. The latch for the light prints in place.
Your light's body diameter should be greater than 20mm and less than 27mm. The sweet spot is 22-25mm.